" a Liitle lamsy- divey" Ivy tutorials 1.2.3

When I was a little girl,
my mother 
taught me a "nonsense song" which she had learned when she was young;  

it went like this:
OH! -
"Mares eat oats and does eat oats and little lambs eat ivy 
a kid'll eat ivy too, wouldn't you?"

but 
this is what most people heard when they listened to it played on the radio -
OH!
"Mairsy doats and doesy doats and a little lamsy-divy
a kidlle-deedivy too- wooden shoe?"

as a child 
it took me a while to figure out what this song meant, and no doubt you're probably wondering 
what in the world I mean 
by including these silly lyrics as the intro to this post? 
The answer is pretty simple- 
I needed a working title with IVY in it, which is how 
 I came to recall this silly song.  
Funny how certain tunes can stick and stay in your head no matter how old you get. 
ANYHOOSIE 
as you've probably figured out by now
 this particular post is all about 

IVY!
❧❦❧

so lets get started

I don't know if anyone admires
Sole's Ivy tutorial on Pequenas Cosas blog:  as much as I do. 
It is one of the most REALISTIC on the net.
I always wanted to give it a go, and since I needed some IVY for the Villa Leone window planter, I turned to her
Hiedra tutorial

http://minis-sole.blogspot.ca/2014/08/hiedra.html?m=1  

I followed Sole's instructions very closely and although I'm satisfied with my results hers look Really Real! 

even so

 here's what I did

I used wide masking tape and laid it sticky side up. 

I laid thin pieces of wire on top of it to form the stems.

I laid a second piece of masking tape over the top and outlined the stems with a ball tool to seal the 2 layers.

Then I drew on the leaf shapes with a pencil and cut them out with scissors.

Afterwards, I painted the stem brown and the leaves green.
I made 4 stems of varying lengths and left enough of a stem on the ends of each one so that I could hang them over the edge of the planter and arrange them to suit.
Well FOUR STEMS was not quite enough because my ivy looked too skimpy for the visual bulk of the planter so I ended up using some leftover leaf scatter I had in my stash to fill in some of the gaps which is what you see below-
the extra scatter really beefed them up! 

Below is how the ivy looks installed. 
I'm happy with the finished planter and would give Sole's tutorial 2 thumbs WAY UP! 

* however-make sure to make more than you think you'll need*

and thus ends Ivy tutorial #1
❧❦❧

next up-

Ivy tutorial #2  
which came about as a result of wanting to fill up these two china pots which I'd cobbled together from some beads.
For the ivy I used a product which Fatima and I purchased on line.
BIRCH SEED SCATTER
if you have birch trees in your neighborhood- keep the cones then make your own! 
http://www.zaboobadidoo.com/making-convincing-ivy/
The 2 blogs above and below are both good references  on how to use it for ivy
http://www.reapermini.com/Thecraft/24
 here's what I did

I mixed two greens onto the birch spacers, and mixed them in with a paint brush, dragging it over the spacers so that they were evenly covered.  

It takes a while for all of the individual leaves to get painted and even when you think that they're done, many leaves will be still missing some paint, however  you can always touch up the bald spots later. 
When they were ready, I transferred them onto a non-stick surface and separated any clumps with my fingers.
This is messy and also takes a while because the leaves are very tiny. 

I made several batches of ivy leaves in different shades of green; not wishing to run out of them too soon. 

Using zaboobadidoo's tutorial, I glued the painted leaves onto a dead root salvaged from a herb plant. 
 I re-touched the leaves with more paint as required and adjusted the stems to form a shape and draped it to my specifications. 

and
Ta Da! 
❧❦❧

Ivy tutorial #3
is a variation of the same as above
( in case you don't happen to have any dead roots waiting around in your stash-)
 I'm using loops of thin wire which are tied off about 1/4 inch from the end

cut through the loops and splay outward so you can paint them.

When painted brown, leave them to dry.
I propped mine up with a clothes peg

I shoved a little air dry clay ( Play-doh) into the pot and then added the painted stems, shaping them as needed.

This photo reminds me of the legs of an emerging spider- ugg!

 I used 527 glue because it stays fluid long enough for you to dip the ends of the ivy leaves into it 
then stick them to the frame. 

When I'd applied enough of the leaves, I re-adjusted the stems and then touched-up the stems with more brown stain, and the leaves with more green acrylic paint mixed with a green glaze. 

And placed the vases on the mantle in Villa Leone's Morning Room.

 and this is what they look like in place!

And although we have come to
"The End" 
I can't let you go until I give you the link to the tune of that nonsense song
 so that you can have it stuck in your mind from now on  too-

https://www.youtube.com/watch?v=EU2CKQQr90E

OH! 
mairsy doats and doesy doats and little lamsy-divy
A kidlley-divy too, wooden-shoe? 
OH 
a kidlle-divy too, wooden-shoe."
❧❦❧


miss you mom
✝
elizabeth

"STAIR-ing" at the FLOOR

This posting is about 2 things; 
a) how I made the tile floors for VILLA LEONE 
and b) how my staircase turned out. 
I hope to encourage others by telling you not only what I did wrong but how "mistakes" can often lead you in an entirely new direction which is BETTER than what you'd originally planned.

I'll begin this with the
TILE FLOORS

FYI

NONE of what you see is permanently installed. Everything is loose, walls, floors, stairs, lights etc.  I am working this out like a giant 3D jigsaw puzzle still trying to figure it out, so I don't dare to glue ANYTHING in permanently- - - -YET.

As I'd mentioned a couple of posts ago, I had been hanging onto this wrapping paper for over a decade.  It was showing its age but I thought that a good hot ironing would restore it enough to make it usable. 
WRONG! 
After repeated tries, it was still looking nasty and so I had to resort to plan B, which was sheets of tile paper which I had purchased at the craft store. 

I cut the heavy card to fit the entry hall, and the floor for the dining room and spray- glued the paper to it, smoothed it flat, then sealed it with Mod Podge, which promptly caused it to wrinkle.
GRRRRRR!
I had to roll a brayer over the tacky floor paper to remove the bubbles and ensure that the tiles dried flat.  
note to self
NEXT TIME USE MOD PODGE AS PAPER ADHESIVE, and NOT Spray glue, because the
MOD PODGE sticks better!  

lesson learned

Anyway,
this is what the floor looked like when it was completely dry.  I was going to leave it like this, but the more I looked at it the less satisfied I was with it, because it lacked texture and dimension. 

To give the tiles dimension I scored along the lines with a ball stylus and a straight-edged ruler. 

I aged the floor with a thin wash of brown gel stain and sealed the color with hairspray. 

 To give the tiles texture, I brushed over the entire surface with a slurry mix of drywall compound and water, then wiped it off with a soft cloth.

When the floor was dry, I sprayed it with hair spray let that dry and then used a light application of liquid floor polish to give it a soft shine.

This close up of the tiles shows you the surface texture.
I was pretty happy with how the floors turned out.  And although they were not what I had originally intended, I liked Plan B BETTER than Plan A
***
NEXT UP- THE STAIRCASE
It is no secret that I HATE making stairs because
it involves MATH and I have never been good at MATH.
I made this staircase because I had to, not because I wanted to.
I stressed out about it for several months. I did a little bit, got stuck, left them and tried again later.  This process repeated itself several times over the course of many weeks and
this is what they finally ended up as...

I had to bulk up the staircase more than what they are in the Willowcrest kit. The space for them over the front door is tight.  Later, the door trim is going to have to be cut to allow for that stair return.
ugggg
MORE MATH :(


But I'm getting ahead of myself again, so let me back up.

Fatima gave me some plaster embellishments that she had in her stash which she thought I might be able to use.

There were 2 sheets of these. 
After I had built the staircase, I cut these embellishments apart and glued them to the surface of the stairs.
You can see in the photo below the carvings next to the treads and under the stair return, but originally I had GONE CRAZY and glued the paster bits all over the entire flat surface of the support, which I'd painted, sealed and painted again. 

By the time I'd finished it looked cheap and tacky.

So- 
I pulled off most of the embellishments to try and tone it down and of course it lifted off some of the layers of drywall plaster and made the surface irregular and- INTERESTING!
WHO KNEW?
I LOVED IT! :D

I had accidentally made

OLD STONE

Front face of the staircase

This was BETTER than what I had originally hoped for!  I sealed the surface with acrylic sealer and painted the unit with antique white acrylic paint and while it was still damp I added oil based varnish and blended the two mediums together, which of course naturally pooled and separated, then sealed it again with spray sealer. I kept on repeating this process until I was happy with the final look. 

Stairs in situ

close up of the steps

Afterwards I slipped the staircase back into its location to gage the effect and...
I LIKED IT!
but when I hooked up the chandelier I'd made
I changed my mind

The incandescent light made the brown stone look PINK!

(back to the drawing board )

I took them out and gave the unit a thin wash of water mixed with drywall patch, and a tiny drop of white acrylic paint.  I brushed the mix onto the surfaces and wiped it right off again spray sealed it, tried it in situ and
repeated this process again and again until the staircase looked right whether the lights were on or off.

Then I built the dividing wall. 

I had already run out of the wall paper I had used for the hallways, so after much trying to match it and failing, I took a lesson from the pages of my friend Janine's real life house.  
Janine has a HUGE WALL PAINTING of the Girl with the Pearl Earring on her bathroom wall, it is Stunning and the visual impact is Immediate!  I used the same principal by using a trompe l'oeil print for the end panel of the staircase.
THIS TIME I used MOD PODGE to adhere the print to the wall board.  When it was dry, I sealed it with MOD PODGE and when that was dry I gave it a wash with the same slurry of drywall compound mixed with water to hopefully give the print the look of fresco, which
I sealed with more hair spray.  

It doesn't match the green walls but it does compliment the staircase.  Above is with the light from the hall chandelier warming up the print and below is with the light off.

                    Lighting makes such a difference 
                           Especially in miniatures. 

So this is where I'll have to leave you. 

I've yet to decide what to do about a handrail.  Janine says I don't need one, my daughter Sam agrees, but I'm not convinced.  Because of the irregular steps, a normal handrail with balustrades won't work, which is why I am considering running one attached to the wall running in front of the window.  This problem will have to be resolved one way or the other before I glue the staircase into place. 
ahhh me 
more math on the horizon... :(
I think I need a coffee 

ciao ciao!:D

elizabeth
Next post- LIGHTING and DINING ROOM update